Universal Testing Machine

• Attractive and elegant Aluminium panel is provided for heat dissipation
• A Micro - controller based data acquisition system for data acquisition and indication.
• 4 Lines x 20 Characters LCD display for displaying Load & Crosshead travel values
• Simplicity reading because of digital (LCD) display
• Membrane keyboard for data entry
• Auto - detection of over - load, over- travel & specimen break. On detection of any of these conditions, the hydraulic motor is automatically switched off.
• The load is indicated with a resolution of 0.005% of machine capacity.
• Elongation is indicated with a resolution of 0.01 mm

Instructions:

• Load capacity: Various different capacities can be offered up to 5000 kg
• No. of load cell: Optional One or Two
• Cross Travel: up to 1000 mm
• Facility of full-scale elongation as well as extensometer gauge length elongation
• Horizontal daylight: 450 mm
• Speed: Variable between 1.33 mm/minute to 500 mm/minute
• Paint: Powder coated.
• Power: 230 Volts, 50 Hz, single phase.

Price Range: Rs 4 to 8 lakh/Unit

• Max Tensile Space: 560 mm
• Max Compression Space: 530 mm
• Circular-specimen Diameter: 6~22 mm
• Flat-specimen Thickness: 0~15 mm

Price Range: Rs 2.5 to 5 lakh/Unit

• Accuracy: 0.5%
• Vertical Test Space: 700 mm or More
• Capacity: 100n - 1000 kn
• Horizontal Test Space: 570 mm or More
• Weight: 1000-2000 Kg

• Power Source: 220V - 380V
• Measuring Range: 0.4% - 100% F.S
• Resolution of Displacement: 0.1um
• Power Supply: 220/380V, 50/60Hz

Price Range: Rs 3 to 6 lakh/Unit

• Capacity: 100n - 1000 kn
• Accuracy: 0.5%
• Vertical Test Space: 700 mm
• Horizontal Test Space: 570 mm
• Weight: 1000 - 2000 Kg

Price Range: Rs 3 to 6 lakh/Unit

• Weight: 5000 - 55000 Kg
• Max capacity: 1000 kn
• Power Source: AC440V
• Accuracy Grade: 1

•Open type cross head

•Hydraulic wedge action grips

• Servo controlled Motorized Valve incorporating of control modes - Standard manual control, Load rate control, Elongation rate control, Auto start & initial valve open start.

•Loading accuracy as high as + 1%

•Straining at variable speeds to suit a wide range of materials.

•Printer & PC graphs enable study the behavior of the material.

•Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen.

•Simplicity in reading because of digital readouts.

•Wide range of standard and special accessories, including load stabilizer.

•Easy change from plain to threaded and screwed specimens.

•Large effective clearance between columns enables testing of standards specimens as well as structures.

•Simple controls for ease of operation.

•Robust straining frame of an extremely rigid construction.

•Safe operation ensured by means of safety devices.

•Fully enclosed and protected pressure transducer.

•RS 232 serial port to transfer data to computer for analysis/storage evaluation etc.

•Manual control & release valve operation.

•Open type cross head

•Hydraulic wedge action grips

• Servo controlled Motorized Valve incorporating of control modes - Standard manual control, Load rate control, Elongation rate control, Auto start & initial valve open start.

•Loading accuracy as high as + 1%

•Straining at variable speeds to suit a wide range of materials.

•Printer & PC graphs enable study the behavior of the material.

•Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen.

•Simplicity in reading because of digital readouts.

•Wide range of standard and special accessories, including load stabilizer.

•Easy change from plain to threaded and screwed specimens.

•Large effective clearance between columns enables testing of standards specimens as well as structures.

•Simple controls for ease of operation.

•Robust straining frame of an extremely rigid construction.

•Safe operation ensured by means of safety devices.

•Fully enclosed and protected pressure transducer.

•RS 232 serial port to transfer data to computer for analysis/storage evaluation etc.

•Manual control & release valve operation.

• Specially designed for high tensile TMT bars
• Supports Tensile, Compression, Transverse, Shear and other similar tests
• Load capacity: 10 TON TO 100 Ton (1000 kN)
• Testing of round bars from 10 to 40 mm
• Stroke length of 250 mm
• Available in Mechanical and Computerized control Panel

Price Range: 250000-600000